Vax Power 6 User Manual

Taking care of your machineTaking care of your machine
IMPORTANT: Water temperature should not exceed 40°C when washing the pre-motor lter. Allow to dry
completely before replacing in the vacuum cleaner.
Cleaning the shroud
NOTE: The shroud isaccessed by removing the dirt container lid and is located underneath the pre-motor lter.
IMPORTANT: Water temperature should not exceed 40°C when washing the shroud. Allow to dry completely
before replacing in the vacuum cleaner.
Cleaning the pre-motor lter
24hr
24hr
Tap to remove excess dirt for
a quick clean.
Wash when a deeper clean
is needed.
40�C max
!
!
!
!
40�C max
!
!
!
!
tap

Vax Power 6 Specifications

General

Suction power	380 AW
Variable power	Yes
Maximum input power	2200 W
Annual energy consumption	- kWh
Proper use	Home
Noise level	- dB
Cleaning surfaces	Carpet, Hard floor
Vacuum air filtering	HEPA
Dirt separating method	Filtering
Type	Cylinder vacuum
Cordless	No
Dust capacity	3 L
Product color	Grey, Orange, Silver
Tube material	Plastic
Dust container type	Bagless
Cord length	7 m

Weight and Dimensions

Weight	5600 g