---
The crevice tool and TurboTool can be attached to both extension tube and hose directly.
The dusting brush can only be attached to the hose directly.
This unit has a constantly rotating brushbar. Vax recommends you raise the brushbar before attaching accessories.
Using accessories
Attaching to hose
Remove hose from its holder and
unwind hose from unit.
Choose an accessory. Attach accessory to hose.
Attaching to extension tube
Remove extension tube from holder. Attach extension tube to hose. Attach accessory to extension tube.
Operation
6
To Next Page
Loading...
Need help?
General
