WARNING: To reduce the risk of personal injury, unplug the carpet washer
before performing maintenance/troubleshooting checks.
Is there an accessory missing?
• Check the ‘Parts Overview’ page in this guide to
m
ake sure the part is definitely included in your
unit.
Why won’t the carpet washer turn on?
• It may not be plugged into the electrical outlet
correctly: ensure that the plug is pushed in
securely and switched on.
• The power button on the unit hasn’t been fully
depressed.
• If unit cuts out during use, disconnect the unit from
the wall socket, allow to cool for one hour, clean the
filter and empty the dirty water tank and check
hose, brushbar for blockages.
Why won’t the cleaner pick up solution/spills?
• The dirty water tank may be full and the auto shut
o
ff engaged. Empty the dirty water tank.
•
Ensure the dirty water tank is fitted correctly and the
tank cap is securely fitted.
• Check the brushbar for blockages.
Why won’t the solution/clean water dispense?
• Ensure the clean water tank is fitted securely.
• The solution/clean water tank may be empty.
• Ensure dirty water tank is fitted securely.
VRS6W Carpet Washer User Guide v1.0.qxd:User guide 23/7/10 14:56 Page 8
To Next Page
Loading...
Need help?
General
