EasyManuals Logo

Vax PowerWash 2000W User Manual

Vax PowerWash 2000W
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Never use the turbo nozzle on cars,
tyres and engines.
WARNING
To attach the jet nozzle.
Fitthelancewitharm
push and twist to lock
into place.
The jet nozzle has a wider spray and is ideal for use on surfaces areas such as cars, garden furniture,
decking and boats.
To attach the turbo
nozzle,tthelancewith
armpushandtwistto
lock into place.
Using your accessories
The turbo nozzle has a more concentrated spray and is ideal for use on very dirty surfaces, patios or masonry.
Asitisnotttedwithapressureregulatoritisnotsuitableforuseondelicateorpaintedsurfaces.
Using your machine
Hold down the release button on the
lance, push the jet nozzle and lance
rmlytogetheruntilyouhearan
audible CLICK. Release the button and
gently pull the jet nozzle to make sure it
is locked securely before use.
Hold down the release button on the
lance, push the turbo nozzle and lance
rmlytogetheruntilyouhearanaudible
CLICK. Release the button and gently pull
the turbo nozzle to make sure it is locked
secure before use.
Squeeze the trigger on the
trigger handle to release a
high pressured water jet, and
start cleaning.
Squeeze the trigger on the trigger handle to release
a high pressured water jet, and start cleaning.
Using your machine
IMPORTANT: Always make sure the machine is switched o and the safety button on the trigger handle
is LOCKED before connecting/disconnecting the lance, nozzle or accessories.
Unhook the solution tube and
insert into the solution bag.
Solution only dispensed with
the trigger handle, lance and
solution nozzle, or car/outdoor
/rotary brush if supplied.
Switch the machine on and
squeeze trigger to dispense the
water and solution mix.
After use rinse the pressure
washer to prevent blockages.
Inset the solution tube into a
bucket of fresh water (Max
40
C), turn the machine on and
squeeze the trigger for 1 minute.
Using solution with your pressure washer
Always make sure the pressure
washer is switched OFF before
connecting/disconnecting the
pressure hose, lance, accessories
or solution bag.
WARNING
IMPORTANT: When using solution make sure you follow the dilution instructions and use Vax solution only.
Solution can only be used with the trigger handle, lance and solution nozzle, or car/outdoor/rotary brush
if supplied. Solution CANNOT be used with the jet and turbo nozzles.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vax PowerWash 2000W and is the answer not in the manual?

Vax PowerWash 2000W Specifications

General IconGeneral
BrandVax
ModelPowerWash 2000W
CategoryPressure Washer
LanguageEnglish

Related product manuals