•Checkthe‘Thispackcontains’panelontheboxtomakesurethepart
is included with your machine.
•Makesuretheon/oswitchissettothe‘I’position.
•Theplugmaynotbefullypushedintotheelectricalsocket.
•Checkthefuseintheplugifthisneedsreplacing,alwaysreplacewith
a British 13amp fuse.
•CheckifyourRCDhasbeentripped,ifithastripped,resetit.
•Thepowercordmaybedamaged.PleasecontactourCustomerCare
Line on (UK) 0844 412 8455 (ROI) 1-800 928 308.
•Hosemaybeblockedorkinked,checkforleaksinthehoseandclear
any blockages. Straighten out the hose to ensure no kinks and check
the hose pipe connections to the tap and water inlet.
•Nozzlemaybeblocked,clearanyblockagesandcleannozzle.
Go to the ‘Lets talk technical’ page.
•RemoveandcleanthewaterinletlterGotothe‘Takingcareofyour
machine’ page.
•Checkthewaterowratetoyourwatersupply.
•Thepumpmayhavestopped,makesuretheon/oswitchissettothe
‘I’ position and check the plug fuse.
• Thepumpmayhavestopped.Thismaybebecauseofoverheatingdue
to poor water supply. Check the water ow rate to your water supply.
•Hosemaybeblockedorkinked,checkforleaksinthehoseandclear
any blockages. Straighten out the hose to ensure no kinks and check
the hose pipe connections to the tap and water inlet.
•Theremaybeanairlock.Tounlockthetriggersafetylock,squeeze
the trigger to release water before the machine is switched on.
•CheckassemblyofsolutionapplicationbottleGotothe‘Using
your machine’ pages. Nozzle/accessory may be blocked, clear any
blockages and clean nozzle Go to the ‘Lets talk technical’ page.
SolutionProblem
What to do if it goes wrong Getting in touch
There is an
accessory missing
Why won’t my pressure
washer turn on?
Why won’t the water
/solution dispense?
Why won’t my pressure
washer reach operating
pressure?
* Calls are charged at the UK local rate. Please make a note of the serial number and model number of the pressure washer
before calling.