To Next Page

To Previous Page

Using your machine

Unhook the solution tube and

insert into the solution bag.

Solution only dispensed with

the trigger handle, lance and

solution nozzle, or car/outdoor/

rotary brush if supplied.

Switch the pressure washer on

and squeeze trigger to dispense

the water and solution mix.

After use rinse the pressure washer

to prevent blockages. Inset the

solution tube into a bucket of fresh

water (Max 40

�

C), turn the

machine on and squeeze

the trigger for 1 minute.

Using solution with your pressure washer

IMPORTANT: When using solution make sure you follow the dilution instructions and use Vax solution only.

Solution can only be used with the trigger handle, lance and solution nozzle, or car/outdoor/rotary brush

if supplied. Solution CANNOT be used with the jet and turbo nozzles.

TIP

Always make sure the

pressure washer is

switched OFF before

connecting/disconnecting

the pressure hose,

lance, accessories or

detergent bag.

Questions and Answers:

Need help?

Do you have a question about the Vax PowerWash 2500w and is the answer not in the manual?

Vax PowerWash 2500w Specifications

General