To access the water
lter, unscrew water inlet
connector and remove.
Always store tools and power cord
into the allocated storage slots.
Maintenance
Storage
Let’s talk technical
To remove the water lter,
pinch the inner water lter
tab with pliers and gently pull.
The water lter can be rinsed
under running water periodically.
IMPORTANT: Always rinse fresh water through your pressure washer and accessories for 1 minute after using
detergent to prevent blockages.
IMPORTANT: Before storing your machine always make sure no water remains in the pressure washer or hose/
accessories to prevent frost damage. Keep in a dry place above zero degrees and out of the reach of children.
TIP
Leave the trigger handle
attached when storing
the pressure hose.
To Next Page
Loading...
Need help?
General
