10. Troubleshooting
WARNING: TO REDUCE RISK OF PERSONAL INJURY, UNPLUG CARPET WASHER BEFORE
SERVICING
PROBLEM: Carpet washer won’t pick-up or low suction
Cause: The dirty water tank door is not installed.
Solution: Insert the dirty water tank door.
Cause: The dirty water tank door is not installed correctly.
Solution: Review placing dirty water tank in base of carpet washer.
Cause: The dirty water tank is full.
Solution: Empty the dirty water tank.
Cause: The dirty water passage clogged.
Solution: Clean the dirty water tank.
PROBLEM: Water escaping from carpet washer
Cause: The dirty water tank is full.
Solution: Empty the dirty water tank.
Cause: The dirty water tank is not installed correctly.
Solution: Review placing dirty water tank in base of cleaner.
Cause: The clean water tank is not installed properly.
Solution: Review clean water tank installation.
PROBLEM: Carpet washer won’t dispense solution
Cause: The clean water tank is not installed properly.
Solution: Review How to Operate.
Cause: The carpet washer needs a service.
Solution: Take it to service centre or contact Vax Careline.
PROBLEM: Carpet washer attachments won’t pick up
Cause: The hose is clogged.
Solution: Remove the hose and tools; remove obstruction.
Cause: The dirty water tank is full.
Solution: Empty the dirty water tank.
PROBLEM: Carpet washer attachments won’t spray
Cause: The solution tube is not connected properly.
Solution: Connect the solution tube properly.
12
Troubleshooting
To Next Page
Loading...
