9
5. Rinse dirty water tank and filter with lukewarm
(max 40ºC) water. Wipe and let dry thoroughly
before storing to prevent mildew from forming.
The foam filter can be removed for easier
cleaning and air drying (Fig.7/5).
NOTE: Do not use any chemicals when cleaning.
Replacing dirty water tank in base of
carpet washer
6. While making sure the front of the dirty water tank
is resting on the base, place the rear of the tank
into the base of the cleaner (Fig.7/6).
7. Push handle down until it latches (Fig.7/7).
NOTE: Do not store cleaner with solution in reservoir
or dirty water in dirty water tank. Mineral deposits and
mildew can form which will affect the performance of
the carpet washer.
Fig.7/6
Fig.7/5
8. Storage
Transporting & Storing Carpet Washer
Storing Tools
Place hose and upholstery attachments into their
storing locations (Fig.8/1). Store for next use.
Fig.8/1
Fig.7/7
Emptying & Cleaning the Dirty Water Tank & Filter/Storage
To Next Page
Loading...
