Getting Started
Locate the locking pin and press in
points shown to remove.
Insert handle and re-t locking pin.
PLEASE READ SAFETY INFORMATION BEFORE USE (p3)
Assembling your carpet washer handle
Locking pin will ‘click’ when
in place.
Assembling your tool caddy and hose (Optional)
Attach caddy to unit
top rst.
Ensure locking tabs
are horizontal.
Rotate tabs 90°clockwise
to lock caddy onto unit.
Fit hose connector end
in rst.
Wrap hose around caddy
tightly anti-clockwise.
Clip in the last wrap of
the hose and wash tool
as shown.
Wrap solution tube around
holder for storage.
Assembling your tool caddy and hose (Optional)
4vax.co.uk