6
How To Use
Pour required dose of
cleaning solution
(approx. 40ml per 1L
of water).
Fill clean water tank
with solution mix and
re-fit the screw cap lid.
Recline the machine.
Remove clean
water tank.
For best results apply solution on the forward stroke
and recover solution on the backward stroke.
Mix solution with warm
water (max 40°C).
Unwrap power cord and plug unit in.
Press trigger to
release solution.
Unscrew tank lid
and remove.
Turn machine ‘on’.
Operating your carpet washer
IMPORTANT: Only use Vax carpet cleaning solution. Using other cleaning solution may cause excess
foaming and will prevent your machine from working effectively. Using other solutions will invalidate
the warranty.
To Next Page
Loading...
Need help?
General
