Vax Steam Fresh COMBI User Manual

Using your machine
Press the water tank
release buttons and pull
the water tank to remove.
Slide the water tank back into
the machine until it clicks
into place.
Pull the tab on the water
tank cap to open.
Fill the water tank with
260ml of water, replace the
cap and push rmly to close.
Twist the detergent tank
cap anti-clockwise
and lift to remove.
Pour 50ml of Vax detergent
and 150ml of water into the
detergent tank.
To remove the detergent
tank press both release
buttons and pull to release.
IMPORTANT: If you don’t want to use detergent on your ooring, turn detergent dial to OFF position.
Always test on an inconspicuous area of ooring rst before using detergent.
Filling water tank
Insert the detergent tank back
into the machine until it clicks
into place.
Replace the detergent tank cap
and twist clockwise to close.
Filling detergent tank

Vax Steam Fresh COMBI Specifications

General

Power	1600W
Heat Up Time	20 seconds
Model Number	S86-SF-C
Steam Time	15 minutes
Cord Length	8m