The VAX Steam Cleaner, available in models S85-CM and CDHF-SGXS, is a versatile steam mop designed for quick and easy cleaning of sealed hard floors and surfaces. It can also be used as a handheld steamer for various tasks.
Function Description:
The VAX Steam Cleaner uses steam to clean and refresh hard floors and surfaces, ensuring they are hygienically clean. It is intended for household use only and is not suitable for commercial or industrial applications. The machine operates by heating water to produce steam, which is then applied through various attachments to clean different surfaces. It is important to note that only water should be used in the water tank; adding detergents, perfumes, stain removers, or alcohol-containing products can damage the machine and invalidate the guarantee. For hard water areas, filtered water is recommended.
Important Technical Specifications:
- Voltage: 220-240V~50Hz
- Wattage: 1300W
- Cord length: 5m
- Weight: 2.5kg
- Water tank capacity: Approximately 330ml (filled with 2 x 165ml measuring jugs).
- Heat-up time: Approximately 30 seconds.
Usage Features:
The VAX Steam Cleaner offers both floor cleaning and handheld steaming capabilities.
Assembly:
- Push the main body down into the floorhead until it clicks into place.
- Push the handle into the main body until it clicks into place.
Filling the Water Tank:
- Ensure the machine is on a flat surface.
- Twist the water tank cap anticlockwise and lift to remove.
- Use the measuring jug to fill the tank with 330ml of water.
- Replace the cap, ensuring it sits flush, and twist clockwise to lock it into position.
- Important: Never turn the machine over when water is in the tank, as leakage may occur. The rattling sound of the water tube inside the tank during use is normal.
Cleaning Hard Floors (Steam Glide and Steam Clean Multi):
- Attach the microfibre pad to the floorhead, white side facing up, ensuring it covers the entire floorhead.
- Plug the machine into the mains and turn the dial to 'ON'. The red light will illuminate, indicating the machine is heating up. It will be ready in approximately 30 seconds.
- Twist the steam control dial to the desired setting to activate steam automatically.
- Place a foot on the floorhead and pull the handle backwards to recline the machine.
- Move the machine slowly backwards and forwards across the floor, focusing on high-traffic areas.
- Important: Never use the floorhead without a microfibre pad attached. Do not leave the machine on one spot for an extended period with a damp or wet microfibre pad, as this may damage the floor surface.
- To finish, turn the dial to 'OFF' and allow the machine to cool. The red light will switch off.
- To remove the microfibre pad, hold a corner of the pad down with your foot and lift the machine.
Refreshing Carpets (Steam Glide and Steam Clean Multi):
- Attach the microfibre pad to the floorhead, white side facing up, ensuring it covers the entire floorhead.
- Push the machine into the front of the carpet glider, then place the back of the floorhead into the clip.
- Plug the machine into the mains and turn the dial to 'ON'. The red light will illuminate, and the machine will be ready in approximately 30 seconds.
- Twist the steam control dial to the desired setting to activate steam automatically.
- Place a foot on the floorhead and pull the handle backwards to recline the machine.
- Move the machine slowly backwards and forwards across the carpet, paying particular attention to high-traffic areas.
- Important: Only use the carpet glider when refreshing carpets, and always ensure the microfibre pad is used and covers the floorhead entirely.
- To release the carpet glider, place your foot on the clip and push down, then lift the machine.
- To finish, turn the dial to 'OFF' and allow the machine to cool. The red light will switch off.
- To remove the microfibre pad, hold a corner of the pad down with your foot and lift the machine.
Using as a Handheld Steamer (Steam Clean Multi):
- Press the handle release button and lift the handle to remove it.
- Press the accessory release button and lift the machine to release the floorhead.
- Push the concentration nozzle into the machine until it clicks into place.
- Plug the machine into the mains and turn the dial to 'ON'. The red light will illuminate, and the machine will be ready in approximately 30 seconds.
- Twist the steam control dial to the desired setting.
- Hold the trigger until steam appears from the nozzle. During use, release and squeeze the trigger in short bursts to prevent over-wetting.
- Important: Always check tools are clean and free from debris. Do not use if damaged, broken, or worn. Always switch off the machine before attaching accessories.
Attaching Handheld Accessories (Steam Clean Multi):
- Brushes (Small Round Brush, Grout Brush): Push the concentration nozzle into the machine, then firmly push the selected brush onto the concentration nozzle.
- Utility Head and Pad: Stretch the utility pad over the utility head. Push the utility head and pad into the machine until secure (it will not lock into place; pull to test security).
- Squeegee: Stretch the utility pad over the utility head. Hook the tab on the squeegee into the indent on the utility head (hidden by the utility pad). Firmly push the clip on the squeegee onto the utility head until it locks into position. To remove, pull the clip down.
- Important: The utility pad must be attached to the utility head when fitting the squeegee.
Handheld Accessory Usage:
- Concentration Nozzle: Removes soap scum in baths and shower enclosures, and cleans heavily soiled kitchen areas.
- Small Brush: Ideal for cleaning tiles, sinks, toilets, and oven tops.
- Grout Brush: Lifts embedded dirt from between tiles.
- Utility Head and Pad: For use on upholstery and clothes.
- Squeegee: Great for cleaning windows, tiles, and mirrors.
- Caution: Never use the machine on cold glass/windows as it may cause damage. Taps should be turned off when steaming around them. Allow ovens, oven surfaces, or grills to cool to room temperature before steam cleaning.
Maintenance Features:
Regular maintenance ensures the longevity and optimal performance of your VAX Steam Cleaner.
Emptying the Water Tank:
- Unplug the machine, remove the handle and floorhead, and place the machine on a flat surface.
- Twist the water tank cap anticlockwise and lift to remove.
- Empty any excess water over an empty sink.
- Important: Never remove the water tank cap with the product upright as water could leak out. Always remove the floorhead and handle, and place on a flat surface before removing the water tank cap.
Cleaning the Microfibre/Utility Head Pad:
- Allow the machine to fully cool down before removing the microfibre pad.
- The microfibre pad is machine washable (max 40°C).
- The utility head pad is hand wash only.
- Allow both pads to fully dry before use.
- Important: Do not use bleach or fabric softener when washing.
Clearing Blockages:
- Turn the dial on the machine to 'OFF', switch off at the mains, and unplug safely.
- Allow the machine to fully cool down before performing maintenance.
- To clear a blockage in the nozzle: Press the accessory release button and lift the machine to release the floorhead. Use a small thin object, such as a paperclip, to insert into the nozzle and clear any blockage.
- To clear a blockage in the floorhead: Remove the microfibre pad from the floorhead. Insert a small thin object, such as a paperclip, into the steam holes to remove any blockages.
Safety Precautions:
- Scalding Risk: The machine and accessories get very hot during use. Always allow them to cool down before handling. Never touch the steam jet directly.
- General Safety: Always switch off and unplug the machine when assembling, disassembling, emptying the water tank, or changing cloths/accessories. Keep fingers, hair, and loose clothing away from moving parts.
- Flooring Compatibility: Refer to floor manufacturer's care recommendations. Test on a hidden area first. Not suitable for unsealed or water-sensitive flooring, wax-polished floors, furniture, acrylic surfaces, synthetic, velvet, or steam/water-sensitive materials.
- Colour Fastness: Test on a small hidden area of upholstery/fabric before use.
- Electrical Appliances: Do not use to clean electrical appliances.
- Water Only: Use only water in the tank.
- Damaged Machine: Do not use if dropped, damaged, immersed in water, or left outdoors.
- Power Cord: Do not handle the plug or use the machine with wet hands. Do not pull or carry by the power cord. Do not run over the power cord or use if damaged. If damaged, it must be replaced by a qualified person. Do not use as a handle, pull around corners, or close a door over the cord. Do not unplug by pulling on the cord.
- Blockages: Do not attempt to remove blockages with sharp objects. Remove only as instructed.
- Targeting: Do not aim the machine at people, animals, plants, or electrical components/wires.
- Voltage: Use with correct voltage as listed on the ratings label.
- Clothing: Do not use to clean or refresh clothing worn on the body.
- Unattended Use: Do not leave the machine turned on when unattended.
- Surfaces: Do not use on damaged, uneven, or incorrectly fitted surfaces.
- Thermostat/Thermal Cut-out: If the machine overheats and switches off, unplug it and allow it to cool for 2-4 hours before retrying.
- Fuse: Always replace the fuse in the plug with a British 13amp fuse.
- Extension Cords: Use only CE approved 13amp extension cords. Arrange to avoid trip hazards.
- Storage: Store in a cool, dry area away from children. Ensure the water tank is clean and empty before storage.
Warranty:
The VAX machine comes with a guarantee for repair or replacement if it breaks down within the guarantee period under normal intended use.
- What isn't covered: Functional parts, tools, and accessories after 12 months (due to wear and tear), consumables after 3 months (belts, filters, brushbars, fuses), accidental damage, cosmetic damage not affecting function, damage from use not in accordance with the user guide, lack of regular maintenance, cable damage, blockages, and poor product performance due to negligent use, misuse, careless operation, failure to clean/maintain, use not in accordance with the user guide, use for non-domestic purposes, use of non-genuine VAX components, or faulty installation/repairs by unqualified personnel.
- Online Support: support.vax.co.uk
- Customer Care Team: vax.co.uk/contact
- Accessory Purchase: vax.co.uk
- Product Registration (for FREE 1-year guarantee): vax.co.uk/registration (Terms and conditions apply).
- Email: info@vax.co.uk
Waste electrical products should not be disposed of with household waste. Recycle where facilities exist and check with your Local Authority or retailer for recycling advice.
Need help?
General
To Next Page