15
Emptying the water tank
IMPORTANT: Never remove the water tank cap with the product upright as water could leak out.
Always remove the floorhead and handle, and place on a flat surface before removing the water tank cap.
The utility head and utility pad are only included with the Steam Clean Multi variant.
MAINTENANCE AND CLEANING
Twist the water tank cap
anticlockwise and lift
to remove.
Unplug, remove the handle, floorhead and place the
machine on a flat surface.
Empty any excess water
over an empty sink.
IMPORTANT: Always allow the machine to fully cool down before removing the microfibre pad.
Don’t use bleach or fabric softener when washing.
Cleaning the microfibre/utility head pad
The microfibre pad is machine washable (max 40
�
C).
The utility head pad is hand wash only.
Allow both pads to fully dry before use.
24hr
40°C
MAX
To Next Page
Loading...
