Cleaning the shroud
Remove the long
reach hose from the
accessory bag.
Plug the solution tube,
from the long reach hose,
into the solution port.
Plug the long reach
hose into the front of
the cleaner.
Taking care of your machine
Remove dirty water tank To empty the tank, unplug
the quick spout pour cap
and empty.
Insert dirty water tank
back into the cleaner
Always switch o and unplug the
carpet washer from the electrical
outlet before assembling, lling
and emptying the clean water
tank, emptying the dirty water
tank, or before connecting /
disconnecting the attachments.
WARNING
IMPORTANT: All solution must be emptied from tanks when storing the machine
NOTE: Rinse out tank with clean water and leave to air dry before storing your machine
Emptying the dirty water tank
For large spills use the carpet washer
Turn the machine on. Recline the machine. For best results use
straight parallel strokes.
Using your machine
Turn the machine on. Press trigger to
release solution.
Pull wash tool over
treated area to pick
up solution.
Using the wash tool
TIP
For best results apply
solution on the forward
stroke and release the
trigger to recover on the
backward stroke.
Do not over saturate your upholstery.
The clean water tank will need to be lled with solution
and water before use.
To Next Page
Loading...
Need help?
General
