Vax V-049 - How to Assemble; How to Operate

www.vax.co.uk
4
assembly / operation
3. How to Assemble
Insert handle into body of cleaner and push down firmly
until handle locks into place with a click (see Fig.3/1).
To store the cleaner, press the telescopic handle release
button on the top of the cleaner and push the handle down
(see Fig.3/2).
To prepare the vacuum for use, press the telescopic handle
release button on the top of the cleaner and pull handle up
until it locks into place (Fig.3/3).
4. How to Operate
Turn the quick cord release for easy cord removal. Secure
cord in cord clip to keep out of the way while vacuuming
(see Fig.4/1).
Plug cord into electrical outlet. Turn cleaner on by pressing
the on/off switch located on the top of the unit (Fig.4/2).
To release the handle pull back handle while pressing on
the front head (Fig.4/3).
Fig.3/1
Fig.4/1
Fig.4/2
Fig.4/3
Fig.3/2
Fig.3/3
Vax V-049 User Guide.qxd 28/11/06 15:04 Page 4