Important notes/ troubleshooting
1) If the suction is significantly reduced, the filter may require cleaning.
2) During wet vacuuming, if the float rises and blocks suction, you will notice the change in the sound that the
machine makes. This is a safety feature and is intended to prevent continued use when the recovery tank is full of
liquid. Switch off the appliance, empty the liquid, re-assemble and then restart. If the float still rises and blocks off
suction, the motor protection filter may be clogged, switch off and refer to fig 18.
3) If the appliance overturns, the float will block the suction. Turn off the appliance, place in correct position and wait
until the float resets. Restart the appliance.
To Next Page
Loading...
Need help?
General
