Let’s talk technical
Before carrying out any maintenance make sure the machine is switched o and unplugged.
CAUTION
To access water lter unscrew water
inlet connector and remove.
Maintenance
To remove water lter, pinch the
inner water lter tab with pliers
and gently pull.
Water lter can be rinsed under
running water periodically.
IMPORTANT: Always rinse fresh water through your pressure washer and accessories for 1 minute after using
solution to prevent blockages.
IMPORTANT: If using the pressure washer with water from a water butt, the water lter will need
to cleaned more frequently.
IMPORTANT: Before storing your machine always make sure no water remains in the pressure washer, hose/
accessories. Once machine is switched o and before removing the nozzles, lance or trigger handle always squeeze
the trigger until no more water comes out, to prevent frost damage. Keep in a dry place above zero degrees and out
of the reach of children.
Removing a blockage in the lance and nozzles
To remove the lance from trigger
handle rmly push and twist
the lance anti-clockwise, when
unlocked pull to remove.
To remove the nozzles press the
nozzle release button and pull.
Insert the nozzle cleaning tool into the
end of lance and nozzles to remove
any dirt or debris.
Always store tools, power cord and pressure hose into allocated storage slots.
Storage
To remove the lance from the trigger
handle rmly push and twist the lance
anti-clockwise. When unlocked pull
to remove.
To Next Page
Loading...
Need help?
General
