To Next Page

To Previous Page

Vax Careline: AU: 1300 361 505

NZ: 0800 800 900

vax.com.au

vax.co.nz

Operation

How the robotic sweeper operates

TIP: For more ecient cleaning and better results, use the robotic sweeper in small enclosed areas. If you have

a larger area to clean try to segment it into smaller areas, moving the robotic sweeper from one area to another.

Closing all entry doors is an easy way to conne a cleaning space. For example: if you have an L-shaped room,

divide the room up into 2 rectangles. Start the robotic sweeper in 1 rectangle and when nished move it to the

2nd rectangle.

NOTE: The robotic sweeper is intended for bare oor cleaning only. For best results clear the area to be cleaned

of any cords, rugs or mats.

TIP: Throw rugs and mats rolled up act as great barriers to enclose a desired cleaning area. Best performance

and results come when the robotic sweeper is set up to clean in conned spaces where it cannot wander o.

Random Edge FollowingCircular

This robotic sweeper is equipped with functions suitable for cleaning HARD FLOOR SURFACES in the home

only, such as wood, tiles, and linoleum. This robotic sweeper has a three part cleaning routine that continuously

repeats. The routine consists of Random, Circular, and Edge Following.

NOTE: This process will repeat until it is stopped or batteries run out of power.

NOTE: This product is intended for use in conned/enclosed spaces.

Continual 3 step cleaning process

NOTE: The cleaning program consists of 3 steps that occur in order and repeat. They are not selectable, they

have been chosen for optimal eectiveness.

• The robot will start in random mode for 3 minutes then it will go to circular mode until it hits an edge, which

can be a wall, side of a dresser or edge of a stair.

• Then it will start its edge cleaning mode for 3 minutes and repeat starting with random mode again.

Vax VX1 User Manual

Other manuals for Vax VX1