Vax Careline: AU: 1300 361 505
NZ: 0800 800 900
vax.com.au
vax.co.nz
9
Maintenance
(Keep your Vax as good as new)
Installing and cleaning the FOAM lter
NOTE: Unplug machine from the power outlet before performing maintenance.
Installing Foam Filter
1. Follow instructions to remove dry dust lter rst before changing to foam lter.
2. Carefully slide foam lter down over the lter cage making sure the whole cage is covered. (g.1 & 2)
Cleaning Foam Filter
3. Carefully remove foam lter. (g.3)
4. Use a mild soap and water solution to wash foam lter and rinse with clean water. (g.4)
5. Allow lter to air dry before installing and using again.
To Next Page
Loading...
Need help?
General
