Vax VX40

Vax Careline: AU: 1300 361 505
NZ: 0800 800 900
vax.com.au
vax.co.nz
7
Operation
SETUP the Blower Function
Remove the hose from
the standard hose outlet
used for cleaning modes
and place it on the blower
outlet located at the back
of the machine. Remove
oor tool and connect the
crevice nozzle to hose.
Connect the vacuum
cleaner to the power
supply and switch ON
by pushing the on/o
switch “I”.
WARNING: Keep bystanders clear from blowing debris (including persons and animals)
WARNING: Wear a dust mask and protective eye wear when using blower function .
IMPORTANT: Make sure the tank container is empty before using the blower.