Vax W86-DP-R - Emptying the Recovery Tank

Using your machine
Using your machine
Emptying the recovery tank
Toremoverecoverytank,
pressdownonrelease
buttonandpull
Removerecoverytanklid
toempty
Note: Therecoverytankhasanautomaticshutotopreventthetankfromoverowing.Ifthisisactivated,
themachinewillnotpickupandthesoundofthemotorwillchange.Therecoverytankwillneedtobeemptied.
Uncliplatchesontanklid
toseparatefromthetank
Pourdirtywaterintosink Cleandirtanddebris
fromfoamlter.Foam
ltercanberinsedwith
water(Max40�C)
Tilttankintopositionand
pushrmlyuntilclicks
intoplace