Vax W90-RU-B

Maintenance (Keep your Vax as good as new)
vax.co.uk
11
Storage
• Empty and rinse out clean and dirty water tanks and leave to air dry before replacing.
• You can remove the handle and tool caddy for convenient storage.
1
Replacing the belt
Use a crosshead
screwdriver to remove
two (2) screws.
!
WARNING: DO NOT OPEN THE MOTOR COVER.
!
2
1
2
Remove
damaged/broken
belt off the spindles.
Replace new belt on to
spindles and secure
the belt cover.
W90-RU & W89-RU Series User Guide v1.4.qxd:User guide 2/3/11 10:04 Page 11