© 05.2017 Continental Automotive GmbH
These brief instructions shall not, under any circumstances, be regarded as a substitute for the exhaustive operating instructions
for the DTCO 1381 prescribed by EU Regulation (EEC) no. 3821/85, Annex I B.
Operational elements
Brief instructions Driver
DTCO
®
1381 – Release 3.0
A2C13870700 / 41024284 OPM 000 AA
BA00.1381.30 500 102 www.fleet.vdo.com
Standard display(s) during trip
Times of the driver card(s)
".
(1) Driving time "" since a valid break
time.
(2
) Valid break time "
", in accordance
wit
h regulation (EU) no. 561/2
006.
(3
) Driving time over two weeks "
".
(4
) Duration of the set activity.
103h46 00h15
125h57 00h21
1 2
3
4
Calling up menu functions
Possible only when the vehicle is stationary!
왘 Use the buttons / to select the desired display.
왘 Use button to call up the main menu.
왘 Use / to select the listed functions step by step.
Print daily value:
왘 [printout driver 1] ... [24h day] ... [25.10.2017] ...
[
printout in UTC yes/no]
Enter "Out of scope" beginning / end:
왘 [entry vehicle] ... [OUT begin] or [OUT end]
Enter Beginning of ferry / train:
왘 [entry vehicle] ... [ ferry/train]
왘 Set the current activity.
Set Local time:
왘 [entry vehicle] ... [ local time] ...
왘 Set Local time in steps of ± 30 minutes.
103h46 00h15
125h57 00h21
12:40 0km/h
123456.7km
201h10 00h36
215h00 00h21
select
language?
call main menu?
UTC 29.09.2017
10:40 +02h00
printout
driver 1
language
english
1. Main menu
... others see operating
instructions
VDOi 9h 2
∆| 19h58 10h 1
VDO 00h44
11h00 03h23
Option: VDO Counter, for
details see operating
instructions.
Messages
(1) Pictogram and plain text of the message
! = Event, example [! driving without card]
x = Fault, example [x sensor fault]
= Driving time warning [1 break!]
Operat
ional note, example [
o no paper]
(2) Error code
For further messages and measures refer to the operating instructions.
Acknowledge message:
왘 Press key 2 times, the message disappears.
Insert paper roll
왘 Press the unlocking surface on the printer panel, the printer drawer
opens.
왘 Pull the printer drawer out of the DTCO.
왘 Insert new paper roll according to the illustration and guide it via the
pulley (1
).
왘 Push printer drawer into the printer compartment until it engages.
왘 The printer is ready for operation.
You can start a p
rintout.
Make sure that the paper roll does not become jammed in the
printer drawer and the start of the paper (1) extends beyond the
edge of the printer drawer!
(1) Display
(2) Menu buttons
/ Select function / selection
Confi
rm function / selection
Exit, abort menu
(3) Card slot 1
(4) Combination key Driver 1
Setting of activities and ejection
o
f the driver card
(5) Combination key Driv
er 2
Setting of activities and ejection
of the d
river card
(6) Card slot 2
(7) Cutting edge
(8) Printer drawer
(9) Download interface
(a) Symbol for ADR variant
왘 Press any menu key, change to the desired display.
(1) Time (with "
" = set local time)
(2) "Operational mode"
(3) Speed
(4) Activity, driver 1
(5)
Card symbol, driver 1
(6
) Total odometer
(7) Card symbol, driver 2
(8) Activity, driver 2
(1) Driving time "
" Driver 1 since a valid
bre
ak time.
(2) Valid break time "
", in accordance with
reg
ulation (EU) no. 561/2006.
(3) Time of driver 2; availability time "
".
The option "VDO Counter" allows another standard display; for details
refer to the operating instructions.
12:50 75km/h
123456.7km
1 2
4
8
3
5
6
7
(a)
1 01h21 00h15
2 02h05
1
3
2
(b)