Do you have a question about the VDO MTCO 1324 and is the answer not in the manual?
Category | Automobile Accessories |
---|---|
Manufacturer | VDO |
Model | MTCO 1324 |
Display Type | LCD |
Touchscreen | No |
GPS | No |
Bluetooth | No |
USB Port | Yes |
SD Card Slot | Yes |
Operating Temperature | -20°C to +70°C |
Type | Tachograph |
Power Supply | 12V |
Explains ATTENTION! and NOTES symbols for important information and additional notes.
Provides instructions for correct handling and storage of tachograph charts.
References legal provisions concerning the tachograph and its operation.
Details the left/right keypads, the display, and their functions for operation.
Describes the separating plate, checkpoint marking, chart carrier, and nameplate.
Procedure for opening the tachograph drawer, including conditions like vehicle standstill.
Instructions for inserting the tachograph charts for Driver 2 and Driver 1.
Step-by-step guide for setting the correct time groups for drivers.
Illustrates symbols representing driving times, working times, availability, and break times.
Steps for removing tachograph charts, including conditions and handling of the drawer.
Details automatic functions when the drawer is closed and notes for vehicle standstill.
Procedure when Driver 2 becomes Driver 1, involving chart exchange.
Steps when one driver leaves the vehicle, taking their chart.
Procedure when both drivers leave the vehicle and a new crew takes over.
Step-by-step guide for adjusting the tachograph's time settings.
Note on adjusting time with a chart inserted and its implications.
How the tachograph displays operational messages and warnings.
Procedure to access and view the tachograph's error memory.
Guidance on what to do after remedying an error cause, and when to consult a service partner.
Procedure to update the chart carrier settings after errors.
Details the vehicle speed display, function monitor, LC-display, and reset key.
Lists compatible tachograph charts and their specifications for the MTCO 1324.
Details required entries in the chart's center field before starting a journey.
Details required entries in the chart's center field after ending a journey.
Information on mandatory inspections for the Kienzle MTCO 1324 tachograph.
Guidelines for cleaning the tachograph device and its components.