© Continental Automotive GmbH 17
Indicating instrument (Page 150, figure III)
Comment
Design and functions may deviate from this
indicating instrument (E-Tacho 1323), for
detailed information, please refer to the
respective operating instructions.
1) Vehicle speed display
2) Function monitor
If the LED is lit up, there is a failure
or an event, e.g. a chart is missing or
one of the system's components does
not work properly.
3) LC-Display
(Display for Ignition On)
• 7 digit display of the total distance
travelled, with the last digit indicating
the 100-metre-distances.
• In the bottom line, either the time or
the trip odometer is displayed.
4) Reset key
Key for switching over from time to trip
odometer.
Reset trip odometer to zero
In the second line of the LC display, the
most recently selected option is displayed:
Time or the trip odometer reading.
1. Set the display to "Trip odometer
reading" and press the reset key for a
short time, if appropriate.
2. Then depress the reset key for more
than 2 seconds.
¾ The trip odometer will be reset to "0".
Comment
You may also reset the trip odometer during
ride.
To Next Page
Loading...
