To Next PageTo Next Page
Need help?Do you have a question about the Vector VEC061 and is the answer not in the manual?
General| Continuous Output Power | 600W |
|---|---|
| Peak Output Power | 1200W |
| Input Voltage | 12V DC |
| Output Voltage | 120V AC |
| Output Waveform | Modified Sine Wave |
| Frequency | 60 Hz |
| USB Port | Yes (5V/2.1A) |
| Cooling | Fan |
| Protection | Overload, Overheat, Low Voltage, High Voltage, Short Circuit |
Explains the two-stage DC-to-DC and DC-to-AC conversion process of the inverter.
Describes the modified sine wave output and its characteristics compared to a pure sine wave.
Details the required DC voltage range and current capacity for the power source.
Provides instructions for connecting the inverter to the DC power source via lighter plug or battery clips.
Guidance on plugging AC appliances into the inverter's dual North American outlets.
Specifies ideal conditions for inverter placement: dry, cool, and well-ventilated areas.
Advises on matching equipment load to inverter capacity and understanding startup currents.
Provides estimates for battery run time and recommends periodic engine restarts.
