Vector VECLIPS4 User Manual

2
BATTERY LIFE INDICATOR INPUT/OUTPUT POWERFAN ON
120V AC
OUTPUT
LED LIGHT
USB-C OUTPUT
DC OUTPUTUSB-A OUTPUTFAULT INDICATOR TIME
WIRELESS
OUTPUT
LCD DISPLAY
CONTROL PANEL BUTTONS
1. To activate the unit press the power button for 2 seconds. The display panel will light up and the ventilation fan and icon will
activate for 2 seconds and shut down.
2. To switch the unit off press the power button for 2 seconds until the display panel shuts off.
3. The AC icon will light up when the AC button is pressed, output power and remaining use time will be displayed.
4. Will light up to each corresponding feature when activated, output power and remaining use time will be displayed.
5. When multiple ports are being used at the same time, the total output power and remaining use time are displayed.
6. Should a fault occur the fault icon will flash with the corresponding output icon. Immediately shut down that output or it will be
automatically shut after 10 seconds. Other outputs will not be affected.
POWER BUTTON
WIRELESS
CHARGING BUTTON
USB POWER
BUTTON
DC
POWER BUTTON
LED
LIGHT BUTTON
AC
POWER BUTTON

Vector VECLIPS4 Specifications

General

Brand	Vector
Model	VECLIPS4
Category	Portable Generator
Language	English