EasyManua.ls Logo

VEE GEE BX-1 User Manual

VEE GEE BX-1
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Range: Brix 0.0-32.0%
Resolution: 0.2%
Accuracy: ±0.2%
Dimensions: 40 x 40 x 165mm (1.6 x 1.6 x 6.5”)
Weight: 240g (8.5 oz.)
Supplied With: Vinyl Carrying Case (1), Plastic Transfer Pipet (1)
Printed in China VGMNL010320-43001
Operation Manual
Model BX-1
Brix 0-32%
Specifications
Cat. No. 43001
Temperature Correction Table
For Refractometers Calibrated At 20°C (l=589nm)
Source: ICUMSA, 1974
As an alternative to recalibration of the refractometer due to ambient temperature changes, the following tempera-
ture correction table can be used. Ensuring that both the distilled water and the ambient temperature are both at
exactly 20°C, follow steps 2-7 under the CALIBRATION section on the preceding page. Once this is accomplished, if
ambient temperature changes, simply apply the temperature correction values listed below. For example, a reading
of Brix 40.0% at 25°C is corrected to Brix 40.4%; a reading of Brix 65.0% at 10°C is corrected to Brix 64.25%.
Warranty information and
registration form
can be found at:
www.veegee.com/service_support
Question and Answer IconNeed help?

Do you have a question about the VEE GEE BX-1 and is the answer not in the manual?

VEE GEE BX-1 Specifications

General IconGeneral
BrandVEE GEE
ModelBX-1
CategoryMeasuring Instruments
LanguageEnglish

Summary

Temperature Correction Table

How to Use the Correction Table

Instructions for applying temperature correction values to refractometer readings when ambient temperature differs from 20°C.

VEE GEE Specifications

Product Specifications

Details on range, resolution, accuracy, dimensions, weight, and included accessories for the refractometer.

VEE GEE Introduction

VEEGEE Refractometer Components

Rubber Hood

Protects the focusable lens and prevents ambient light from entering the eyepiece.

Calibration Ring

Mechanism for zeroing or calibrating the refractometer without additional tools.

Non-Roll Stand

Prevents damage to the instrument when set down between measurements.

Rubber Grip

Insulates the refractometer against hand heat for accurate results.

Calibration Ring Set Screw

Secures the calibration ring to prevent shifts during use.

Daylight Plate & Prism

Covers the prism and sample during readings.

VEE GEE Calibration

Calibration Procedure

Step-by-step guide for calibrating the refractometer using distilled water.

VEE GEE Precautions

Handling and Cleaning Precautions

Guidelines for protecting the optical instrument from damage and ensuring proper readings.

VEE GEE General Use

General Use Procedure

Instructions for using the refractometer to measure sample solutions.

Related product manuals