Veeder-Root EMR4 TLS-300 - Page 10

INSTALLATION and QUICK HELP
FOR TLS CONSOLE INTERFACE TO THE
VEEDER-ROOT EMR4 DATALINK
USING AN XTEND 900 MHZ WIRELESS MODEM
577014-353 Rev. A
Veeder - Root
Page 10 of 18
1. Push MODE button to SETUP MODE
2. Push FUNCTION Button to COMMUNICATIONS SETUP
3. Push STEP button to PORT SETTINGS
4. ENTER
 COMM BOARD 2 (RS-232) (May be different Board Number but will be RS-232)
 BAUD RATE 9600
a. If not 9600, then push the CHANGE KEY until 9600 and ENTER
 STEP to PARITY
o If not NONE, then push the CHANGE KEY until NONE and ENTER
 STEP to STOP BIT
o If not 1 STOP, then push the CHANGE KEY until 1 STOP and ENTER
 STEP to DATA LENGTH
o If not 8 DATA, then push the CHANGE KEY until 8 DATA and ENTER