Veeder-Root EMR4 TLS-300 - Page 11

INSTALLATION and QUICK HELP
FOR TLS CONSOLE INTERFACE TO THE
VEEDER-ROOT EMR4 DATALINK
USING AN XTEND 900 MHZ WIRELESS MODEM
577014-353 Rev. A
Veeder - Root
Page 11 of 18
 STEP to CODE
o If not DISABLED, then push the CHANGE KEY until DISABLED and ENTER.
 STEP to CONTINUE to PORT SETTINGS
5. MODE, MODE back to Normal screen
TLS-4XX Consoles
From the Home Screen navigate to Setup>Communication>Serial Port screen:
Select the Serial Port connected to the DataLink modem then select:
• Configured = Enabled
• Label = Enter a name
• Baud Rate = 9600
• Data Bits = 8
• Parity = None