Need help?Do you have a question about the Vega VEGABAR 83 and is the answer not in the manual?
General| Accuracy | ±0.1% |
|---|---|
| Protection rating | IP66/IP68 |
| Communication | HART, Profibus PA, Foundation Fieldbus |
| Measuring principle | Hydrostatic |
| Process temperature | -40°C to +200°C |
| Ambient temperature | -40 to 80 °C |
| Process pressure | Up to 400 bar |
| Output signal | 4...20 mA, HART |
| Housing material | Stainless steel, Aluminium |
| Process fitting | Thread, Flange |
| Material | 316L |
Combines VEGABAR 83 model, 4-20mA/HART output, and SIL qualification.
Covers general instructions, suitability, moisture protection, and cable glands.
Covers safety instructions, voltage supply, connection cables, and cable glands.
Details safety parameterization tools, procedures, and verification processes.
Outlines the sequence for parameter changes, verification, and locking.
Provides step-by-step instructions for installing the display and adjustment module.
Describes the display elements, keys, and basic adjustment system functions.
Introduces the main menu structure, measured value indication, and language setup.
Details the steps for performing zero, span, minimum, and maximum adjustments.
Covers parameter verification, saving, and diagnostic functions.
Provides instructions for saving parameterization data via paper or module.
Explains PACTware requirements, parameter adjustment, and data saving procedures.
Guides on rectifying faults and exchanging process or electronics modules.
To Next Page
