Need help?Do you have a question about the Vega VEGABAR 64 and is the answer not in the manual?
General| Model | VEGABAR 64 |
|---|---|
| Type | Pressure Transmitter |
| Output Signal | 4 ... 20 mA/HART, Profibus PA, Foundation Fieldbus |
| Process Connection | Threads - Flanges - Hygienic fittings |
| Process Temperature | -40 ... +150 °C |
| Ambient Temperature | -40 … +80 °C |
| Material (Wetted Parts) | 316L, Ceramic |
| Housing Material | 316L Stainless Steel, Plastic |
| Protection Rating | IP66 |
Operations must be done by trained personnel; PPE required.
VEGABAR 64 is for pressure measurement; use must be according to manual.
Inappropriate use can cause hazards like vessel overfill or damage.
Instrument requires strict observance of regulations; must be operated flawlessly.
Note Ex-specific safety info for installation and operation in Ex areas.
Details steps for welding socket, sealing/screwing in threaded/flange versions.
Covers safety, power supply selection, connection cable, cable gland, and screening/grounding.
Step-by-step guide for connecting single/double chamber housing.
Provides wiring illustrations for single chamber housing, non-Ex and Ex-ia versions.
Details the indicating and adjustment elements and key functions.
Outlines setup for level or process pressure measurement, including unit selection.
Guides on using PACTware and VEGA DTM for parameter adjustment.
Operator is responsible for removing interferences; lists common causes of malfunction.
Lists common fault messages (E013, E017, E036, E041, E113) and their remedies.
To Next Page
