2.5 Safety label on the instrument
The safety approval markings and safety tips on the device must be
observed.
2.6 CE conformity
This device fulfills the legal requirements of the applicable EC
guidelines. By attaching the CE mark, VEGA provides a confirmation
of successful testing. You can find the CE conformity declaration in the
download area of
www.vega.com.
2.7 Safety instructions for Ex areas
Please note the Ex-specific safety information for installation and
operation in Ex areas. These safety instructions are part of the
operating instructions manual and come with the Ex-approved
instruments.
2.8 Overfill protection according to WHG
In Germany the WHG (Water Resource Act) stipulates an overfill
protection for systems that deal with substances hazardous to water.
An appropriately certified sensor is the prerequisite for such
protection. The VEGAMET 391 fulfils the construction and testing
principles for overfill protection systems. This is certified by the TÜV
(Technical Control Board) statement "PP 5003/09". You can download
this document from our homepage under "D ownloads - Approvals -
Signal conditioning instruments - Overfill protection".
2.9 Environmental instructions
Protection of the environment is one of our most important duties. That
is why we have introduced an environment management system with
the goal of continuously improving company environmental protection.
The environment management system is certified according to DIN
EN ISO 14001.
Please help us fulfil this obligation by observing the environmental
instructions in this manual:
l Chapter "Packaging, transport and storage"
l Chapter "Disposal"
6 VEGAMET 391 • 4 … 20 mA/HART signal conditioning instrument
2 For your safety
36032-EN-091116
To Next Page
Loading...