Vegepod Medium Trolley Stand User Manual

** SEE OUR WEBSITE FOR STEP BY STEP ASSEMBLY VIDEOS **
https://vegepod.com.au/pages/assembly-videos
Stand/Trolley Assembly Instructions
Medium 1m x 1m
Component Checklist
Legs
4
Angle cross braces
With holes
2
Angle cross braces
No holes
2
Cross brace tube
2
Corner brace
4
Long Bolts
M6*55
8
rounded head
Medium Bolts
M6*45
4
Short Bolts
M6*16
16
Nuts
28
Large Bolts
4
Angle trolley
support
2
Tube for Trolley
base
2
Castor wheels
+ rubber caps
4
Allen keys
2

Vegepod Medium Trolley Stand Specifications

General

Compatibility	Vegepod Medium
Material	Powder-Coated Steel
Height	80 cm
Wheel Type	Lockable castor wheels
Weight Capacity	100 kg

Summary

Assembly

Initial Frame Assembly

Connect angle cross braces with holes using cross brace tubes and mid-size bolts.

Corner Brace Attachment

Attach corner braces to angle cross braces using short bolts, ensuring correct orientation.

Leg and Base Tube Integration

Bolt legs to corner braces using long bolts, aligning holes for the trolley base tube.

Trolley Support and Wheel Attachment

Attach angle trolley support to legs and trolley tube with large bolts, then fit castor wheels.

Final Tightening and Protection

Place rubber caps on exposed threads and tighten all bolts with allen keys.