EasyManua.ls Logo

Veichi SI23-D3-004G User Manual

Veichi SI23-D3-004G
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SI23 Solar Pump Inverter Manual
1
Chapter 1 Safety Requirement and Cautions
To ensure safety of your health, equipment and property, please read this chapter carefully before using the frequency inverter
and act in compliance with the instructions when installing,ebugging, running and overhauling the frequency inverter.
1.1 Safety Definition
Danger: it will cause danger of serious injuries and even death while operating against the rules.
Caution: it will cause danger of light injuries or equipment destruction while operating against the rules.
Note: some information is useful while operating and use frequency inverter.
1.2 Safety Requirements and Cautions
●Before Installation
Danger
1. Only qualified personnel can operate the equipment. Before operating, be sure to carefully read the manual about safety,
installation, operation and maintenance. The safe operation depends on the proper processes of choosing models,
carrying, installation, operation and maintenance.
Danger
1. Don’t use the damaged or incomplete frequency inverters; Otherwise, there is risk of injury.
●Installation
Danger
1. Please install the frequency inverter on metal or other nonflammable material, and keep it away from the combustible
material. Otherwise there is danger of fire;
2. No unauthorized modification to the frequency inverter; Otherwise there is danger of damaged.
3. Normal frequency inverter, which is not explosion-proof, can not be installed where with explosive gas or dust; Otherwise
there is danger of explosion.
Attention
1. When two frequency inverters are installed in the same control cabinet, pleas pay attention to the installing place to
guarantee the effective heat dissipation.
2. When carrying the frequency inverter, ease support its bottom.
●Wiring
Danger
1. Wire is connected only when the main circuit is cut off, otherwise there is a danger of shock.
2. Wire is connected by professional person only. Otherwise there is a danger of shock.
3. Earth must be reliable. Otherwise there is a danger of shock.
4. AC power supply should not be connected with output ports U, V, W, otherwise there is a danger of damage to frequency
Question and Answer IconNeed help?

Do you have a question about the Veichi SI23-D3-004G and is the answer not in the manual?

Veichi SI23-D3-004G Specifications

General IconGeneral
ModelSI23-D3-004G
Output Power4kW
Frequency Range0~400Hz
Control MethodV/F Control, Vector Control
Cooling MethodForced air cooling
Storage Temperature-20°C to +60°C
Enclosure RatingIP20
Input Voltage3-Phase 380V (-15%) - 440V (+10%)
Output Voltage0~380V
Protection FeaturesOvercurrent, overvoltage, undervoltage, overload, short circuit, overheating
Operating Temperature-10°C to +40°C (Derating above 40°C)
Humidity5%~95% (non-condensing)
AltitudeBelow 1000m
Output Current9.0A

Summary

Chapter 1 Safety Requirement and Cautions

1.1 Safety Definition

Defines critical safety terms like "Danger" and "Caution" to inform users of potential hazards.

1.2 Safety Requirements and Cautions

Outlines essential safety rules for installation, operation, and maintenance to prevent harm.

1.3 Cautions in Using

Provides specific guidelines and precautions for effective and safe operation of the inverter.

1.4 Technical Specification

Details the performance characteristics and technical data of the solar pump inverter.

1.5 Cautions in Disposal

Specifies environmentally responsible methods for disposing of the inverter unit.

Chapter 2 Installation and Wiring

2.1 Dimension of Inverter

Provides detailed physical dimensions and installation hole specifications for inverter models.

2.2 Solar Pump Controller Wiring

Illustrates the wiring diagram and explains auxiliary terminal functions for controller setup.

Chapter 3 Keyboard layout and functions specification

Chapter 4 Fault Diagnosis and Solution

Chapter 5 Parameters List

Chapter 6 Operation Guidance

6.1 Asynchronous Motor Pump Drive Operation Guidance

Provides detailed instructions for operating pumps with asynchronous motors, including setup.

6.2 Synchronous Motor Pump Drive Operation Guidance

Offers guidance on operating pumps with synchronous motors, covering wiring and setup.

6.3 PV Water Pump Features

Explains specialized functions and protection mechanisms for photovoltaic water pump applications.

Related product manuals