7
Installing Driver
OS Support
Windows 11/10/8/7 (32/64 bits) / Mac OS 10.12 or later Linux OS / Chrome 88 or later.
Android 6.0 or later (Except Samsung Android device)
Installation
For Mac OS, Windows and Linux OS computer:
1. Before installing the driver, please uninstall all tablet drivers from your computer
and keep all antivirus programs and the drawing software closed.
2. Connect the tablet to your computer before installation (Please refer to Tablet
Connection)
3. Please download the driver from www.veikk.com.
4. Click Set up.exe and follow onscreen instructions.
5. Restart your computer after installation.
For Chrome OS computer and the Android mobile phone: No need to install VEIKK driver
on the Chrome OS computer and the Android mobile phone.
Tablet Connection
For Mac OS, Windows and Linux OS computer:
1. Connect the tablet to your computer with USB cable.
2. Open the driver interface. If the product model shows at the upper left corner,
this indicates that the table has been connected successfully. You can start using
your tablet.
For Chrome OS computer:
Connect the tablet to your Chrome OS computer with the USB cable, then you can start
using your tablet.
Note: The shortcut keys of the pen and tablet can’t work on the Chrome OS computer.
To Next Page
Loading...
