8. How to set extend mode/mirror mode?
For Windows：
(1) Please go to the display setting in your computer's control panel.
(2) If you want to set mirror mode, both of the monitors must be set the
same DPI.
(3) If you want to set to extend mode, please right click the desktop, choose
“Extend these displays” in “Multiple displays.
For Mac：
Please open System Preferences, then click Displays–Arrangement. Please
don’t choose the “Mirror Displays”.
9. How to uninstall driver?
Windows:
Run ‘Control panel --- Run ‘program’--- choose‘VKTabletDriver’--- follow the
unload tips until unloading is finished.
Mac:
(1) Open‘Finder’---‘Application’---‘Pen tablet Setting’---‘Uninstall Pen Tablet
Driver’
If the first method do not uninstall the driver completely, please
(2) Open‘Finder’---‘Application’---‘Pen tablet Setting’ please delete the file
directly.
7. The pen can not control the cursor.
(1) Make sure USB and HDMI cable are connected correctly.
(2) Make sure the VK1200 display has been turned on.
(3) Change a USB Port or a computer to have a try.
(4) After all cables are connected correctly, check whether the pen can control
the cursor even without tablet driver. If yes, disable your antivirus and keep all
drawing softwares closed, then go to our website to download the latest driver
and install it .
25
To Next Page
Loading...
