Veikong VFD500-022G/030PT4B - User Manual

Preface
Thank you for purchasing the VFD500 series high performance vector and torque control frequency
inverter
VFD500 series with advanced functions, such as high-performance vector control of induction motor,
user-programmable function and backstage monitoring software, variable communication and supporting
multiple PG cards etc. It is applicable to textile, papermaking, tension control, wire drawing fans and
pumps, machine tools, packaging, food and
all kinds of automatic production equipment. Its excellent
performance is equivalent and competitive to most of international brand AC drives
This manual introduces functional characteristics and usage of VFD500 series inverter, includes product
model selection, parameter settings, running and debugging, maintenance, checking, and so on. Please
be sure to read this manual carefully before operation. For equipment matching manufacturers, please
send this manual to
your end user together with your devices, in order to facilitate the usage.
PRECAUTIONS
 To describe the product details, the illustrations in the manual sometimes are under the state of
removing the outer housing or security covering. While using the product, please be sure to mount
the housing or covering as required, and operate in accordance with the contents of manual.
 The illustrations in this manual is only for explanation, may be different from the products you
ordered.
 Committed to constantly improving the products and features will continue to upgrade, the
informati
on provided is subject to change without notice.
 Please contact with the regional agent or client service center directly o f factory if there is any
questions during usage.
EDIT： V3.19
TIME： 2023-09

Summary

Chapter 1 Safety Information and Precautions

1.1 Safety Precautions

Detailed safety guidelines for various use stages of the inverter.

Chapter 2 Product Information

2.3 Technical Specifications

Detailed technical specifications and parameters of the VFD500 inverter.

Chapter 3 Product appearance and Installation Dimension

3.1 Product appearance and installation

3.2 Wiring

Guidance on electrical connections and wiring diagrams for the inverter.

3.3 EMC question and solution

Chapter 4 Operation and display

4.1 LED Instruction of operation and display

4.2 Display hierarchy and menu mode

Chapter 5 Function Code Table

00 Group Basic Function

01 Group frequency source selection

02 Group Start and stop Control

Parameters related to starting and stopping the inverter and motor.

04 Group Analog and Pulse input

05 Group Analog and Pulse output

06 Group Multi-function Digital input

07 Group Multi-function Digital output

11 Group Motor 1 Parameter

Essential parameters for configuring Motor 1 settings and auto-tuning.

12 Group Motor 1 VF control parameter

Parameters for Voltage-Frequency (V/f) control of Motor 1.

13 Group Motor 1 vector control

Parameters for vector control of Motor 1.

14 Group Torque control

Parameters for configuring torque control functions.

21 Group Keypad and Display Group

22 Group AC drive data and configuration

Configuration and settings for AC drive parameters, including carrier frequency.

23 Group Drive protection function setting

Configuration of various drive protection functions and fault behaviors.

24 Group motor Protection parameter

Parameters for motor protection, including overload and overheat settings.

25 Group Fault tracking parameter

26 Group Fault recording parameter

30 Group Modbus communication parameter

Configuration settings for Modbus communication interface.

31 Group Canopen communication parameter

32 Group Profinet communication parameter

Configuration settings for Profinet communication interface.

40 Group PID function

Parameters and configuration for the PID control function.

60 Group Motor 2 basic parameter

61 Group Motor2 parameter

62 Group Motor 2 VF control parameter

V/f control parameters for Motor 2.

63 Group Motor 2 Vector control parameter

Vector control parameters for Motor 2.

Chapter 6 Fault Diagnosis and Solution

6.1 Failure and diagnosis

Detailed fault codes, possible causes, and solutions for troubleshooting inverter issues.

6.2 Warning type

Information on warning codes, reasons, and corresponding measures.

Chapter 8 Daily maintenance of frequency inverters

8.1 Daily maintenance

Routine checks and cleaning procedures for daily inverter maintenance.

8.1.2 Regular Inspection

Procedures for regular inspection of the inverter, including checks for loose screws and arcing.

8.2 Wearing parts replacement

Appendix A Modbus communication protocol

A.1 Protocol format

A.3 Command code instruction

Instructions for using Modbus command codes for reading and writing registers.

A.6 Register address distribution

Appendix B VFD500-Profinet Communication card usage instructions

1. Installation

2. Set instructions

4. Description of the Profinet communication protocol

5.2 Import the GSDML file

5.3 Configure the network

5.4 Slave communication configuration

5.5 Configure the data characteristics of the slave

5.6 Assign a device name

5.7 Compile and download

6.3 slave configuration

6.4 Download the configuration program and configure the name and IP address of the device.

7. Problems and Handling

Troubleshooting common issues with the Profinet communication card and its indicators.

Veikong VFD500-022G/030PT4B Specifications