Veikong VFD500-055G/075PT4 - User Manual

Preface
Thank you for purchasing the VFD500 series high performance vector and torque control frequency
inverter
VFD500 series with advanced functions, such as high-performance vector control of induction motor,
user-programmable function and backstage monitoring software, variable communication and supporting
multiple PG cards etc. It is applicable to textile, papermaking, tension control, wire drawing fans and
pumps, machine tools, packaging, food and
all kinds of automatic production equipment. Its excellent
performance is equivalent and competitive to most of international brand AC drives
This manual introduces functional characteristics and usage of VFD500 series inverter, includes product
model selection, parameter settings, running and debugging, maintenance, checking, and so on. Please
be sure to read this manual carefully before operation. For equipment matching manufacturers, please
send this manual to
your end user together with your devices, in order to facilitate the usage.
PRECAUTIONS
 To describe the product details, the illustrations in the manual sometimes are under the state of
removing the outer housing or security covering. While using the product, please be sure to mount
the housing or covering as required, and operate in accordance with the contents of manual.
 The illustrations in this manual is only for explanation, may be different from the products you
ordered.
 Committed to constantly improving the products and features will continue to upgrade, the
informati
on provided is subject to change without notice.
 Please contact with the regional agent or client service center directly o f factory if there is any
questions during usage.
EDIT： V3.19
TIME： 2023-09

Summary

Chapter 1 Safety Information and Precautions

1.1 Safety Precautions

Detailed safety precautions categorized by use stage (before installation, during installation, wiring).

1.2 Precautions

Chapter 2 Product Information

2.3 Technical Specifications

Lists detailed technical specifications for the VFD500 inverter across various parameters.

Chapter 3 Product Appearance and Installation Dimension

3.2 Wiring

Covers standard wiring diagrams and connection details for the inverter.

3.3 EMC Question and Solution

Addresses electromagnetic compatibility (EMC) issues and provides solutions.

Chapter 4 Operation and Display

4.2 Display Hierarchy and Menu Mode

4.4 Test Run

Provides a step-by-step guide for performing the initial test run of the inverter.

Chapter 5 Function Code Table

01 Group Frequency Source Selection

02 Group Start and Stop Control

Explains various starting modes, startup frequencies, DC braking, and stopping methods.

04 Group Analog and Pulse Input

05 Group Analog and Pulse Output

06 Group Multi-function Digital Input

Configures digital inputs for various functions like forward/reverse, jog, stop, and multi-step speed.

07 Group Multi-function Digital Output

Configures digital outputs, relay outputs, and virtual DO outputs for various signaling purposes.

08 Group Digital Output Setting

11 Group Motor 1 Parameter

Configures motor parameters such as type, power, voltage, current, RPM, and auto-tuning settings.

12 Group Motor 1 VF Control Parameter

Defines VF curves, multi-point settings, torque boost, and slip compensation for VF control.

13 Group Motor 1 Vector Control

Configures parameters for vector control, including speed proportional/integral gains and torque limits.

14 Group Torque Control

Sets up torque control parameters, including input sources, limits, static/dynamic friction, and speed control.

18 Group Asynchronous Motor Control Advanced Parameters

22 Group AC Drive Data and Configuration

23 Group Drive Protection Function Setting

Configures various protection functions for overvoltage, undervoltage, input/output phase loss, and hardware faults.

24 Group Motor Protection Parameter

Sets motor overload and overheat protection parameters, including gains and thresholds.

25 Group Fault Tracking Parameter

30 Group Modbus Communication Parameter

Configures Modbus communication settings, including protocol, baud rate, data format, and response delay.

31 Group Canopen Communication Parameter

Configures CANopen communication settings, including address, baud rate, and status indicators.

32 Group Profinet Communication Parameter

Details Profinet communication setup, including device name, IP address, and MAC configuration.

40 Group PID Function

58 Group Fire Mode

Chapter 6 Fault Diagnosis and Solution

6.1 Failure and Diagnosis

Provides a comprehensive guide to diagnosing and resolving inverter faults and errors.

6.2 Warning Type

Lists and explains various warning codes and their corresponding causes and measures.

Chapter 7 Selection Guide of Inverter Accessory

7.2 PG Card Type

7.4 CANopen Extension Card

Chapter 8 Daily Maintenance of Frequency Inverters

8.1 Daily Maintenance

8.1.2 Regular Inspection

Appendix A Modbus Communication Protocol

A.3 Command Code Instruction

A.4 Abnormal Response Information

A.6 Register Address Distribution

A.8 The Inverter Acts as a Modbus Master

Appendix B VFD500-Profinet Communication Card Usage Instructions

2. Set Instructions

Provides step-by-step instructions for configuring the Profinet communication card and related parameters.

3. Wiring Instructions

4. Description of the Profinet Communication Protocol

5.4 Slave Communication Configuration

Guides the configuration of the Profinet slave device, including IP address and device name setup.

5.5 Configure the Data Characteristics of the Slave

Sets up PZD mapping and module parameters for slave device data exchange.

5.6 Assign a Device Name

5.7 Compile and Download

5.8 Profinet Communication Card Directly Replace the Settings

6.1 Scan PLC

6.2 Import the GSDML file

6.3 Slave Configuration

Details the steps for configuring the Profinet slave device's network settings.

6.4 Download the Configuration Program and Configure the Name and IP Address of the Device.

Covers downloading the configuration to the PLC and verifying device names and IP addresses.

Veikong VFD500-055G/075PT4 Specifications