veise RZ-A - User Manual

RZ-A
Keypad Digital Deadbolt
Installation Guide / Programming Instructions
Thank you for purchasing our products. Please review this manual thoroughly before operating your device.
All pictures in this manual are for illustration purpose only. Actual product may vary due to product upgrade.

Summary

Installation Overview

Prepare the Door and Check Dimensions

Verify door hole diameter, edge hole, thickness, and frame hole depth for compatibility.

Install the Latch and Strike

Adjust latch backset and install into door; install strike plate into door frame.

Install Exterior Assembly

Route cable, insert torque blade, and secure mounting plate to the door.

Install Interior Assembly

Connect the cable, attach the interior assembly, and fasten with screws.

Detect Left;Right Hand Door Installation

Load batteries and reset the lock to enable automatic detection of door handing.

Programming Instructions

At a Glance

Visual identification of exterior and interior components of the digital deadbolt.

How to Use

Instructions for unlocking and locking the door from inside and outside using various modes.

Definitions

Clarifies terms like Master Code, Auto Lock, Silent Mode, Vacation Mode, and Key Unlock.

Code Format

Specifies rules for Master and User Codes, including length and forbidden number sequences.

Quick Set Up

Guides for changing master code, adding/deleting user codes, and configuring silent mode.

Factory Default Settings

Details the process to reset the lock to factory defaults and lists the default settings.

Troubleshooting

Addresses common issues and provides solutions for installation and operational problems.

Parts List

Information & Safety Warnings

veise RZ-A Specifications

General

Lock Type	Smart Lock
Power Source	Battery
Battery Life	Up to 12 months
Compatibility	iOS, Android
Material	Zinc Alloy
Category	Locks
Connectivity	Bluetooth