Need help?Do you have a question about the veito Blade and is the answer not in the manual?
Follow basic precautions to reduce risk of fire, shock, injury. Connect to grounded outlets, avoid wet hands, do not use extension cords.
Install at least 1.8m high, ensure clean connections. Inspect cord/plug for damage, do not operate if damaged.
Keep combustible materials 1.5m from front, away from sides/rear. Do not cover or insert objects.
Do not use in bathrooms or hazardous areas. Never use while sleeping or unattended.
Details on model, voltage, power, current, dimensions, and weight.
Install by qualified person. Mount horizontally or vertically at least 1.8m from ground.
Do not exceed 90° or go below 45° for horizontal/ceiling mounts. Maintain 0.5m clearance from ceiling/walls.
Fasten brackets securely to mounting surface and heater backside. Use provided nuts and screws.
Instructions for turning on/off, adjusting power levels, temperature, and sleep timer.
Steps to replace the CR2025 battery in the remote control.
Clean external surfaces with a damp cloth. Do not use abrasive fluids. Professional servicing required for repairs.
Product is guaranteed for two years. Follow EU guidelines for recycling electrical products.
General| Power Settings | 4 |
|---|---|
| Heating Element | Carbon Fiber |
| Remote Control | Yes |
| Safety Features | Overheat Protection, Tip-Over Switch |
| Heat Output | 2000 W |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Heating Technology | Infrared |
| Adjustable Thermostat | No |
| Type | Infrared |
| Mounting Options | Wall-mounted |
| Power Levels | 2000W |
| Timer | 24-hour |
| Suitable For | Indoor |
To Next Page
