Rotate the temperature adjustment button if required. Place the front cover
and tighten the connection screw. Close the hot water tap prior to turning
on the device electricity. Turn-on the device electricity. You can adjust the
outlet water temperature with temperature set button and make the device
ready for use.
Control device functions by opening hot water tap, explain how the device
operates by giving these usage instructions to the user. If the device does
not operate due to very low flow rate, control water pressure of your
installation or have control provided by a technician whether whether any
other problem is available.
Temperature Control
Device operates automatically when the hot water tap is opened and it
automatically stops if inlet water pressure reduces below the minimum
level or the hot water tap is closed. Electrical instant water heater heats
the water passing through it directly at the requested temperature and only
generates electricity power.
Water temperature depends on the inlet water temperature, device power
and water flow rate. Requested water temperature is adjusted by changing
via the temperature adjustment button. Also, the temperature is increased
by reducing the water flow rate or temperature is reduced by applying this
reverse.
To Next Page
Loading...
