Need help?Do you have a question about the veito FLOW S and is the answer not in the manual?
General| Model | FLOW S |
|---|---|
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Water Connection | 1/2 inch |
| Protection Class | IP25 |
| Cable Length | 1.5 m |
| Type | Instantaneous Electric Water Heater |
| Water Pressure | 0.5-6 bar |
| Protection | Overheating protection |
Lists all items included in the product package.
Explains the function and basic operation of the instantaneous water heater.
Details the physical placement and mounting requirements for the water heater.
Instructions for preparing the unit and mounting it to the wall.
Steps and requirements for connecting the device to the water supply system.
Procedures and safety guidelines for connecting the water heater to the electrical supply.
Step-by-step guide for the initial power-on and first use of the device.
Instructions on how to remove the flow regulator for troubleshooting.
Explains how to control water temperature using the device's settings.
Guidelines for regular cleaning and routine maintenance of the water heater.
Detailed steps for cleaning or replacing the water inlet filter.
Identifies common faults, their reasons, solutions, and responsible parties.
Information on how to contact customer support for assistance.
Guidance on the proper disposal and recycling of the device.
Details the warranty conditions and coverage for the product.
To Next Page
