Vela Tango 100 Arthrodesis

Questions and Answers

D
Destiny WilliamsAug 12, 2025
What to do if the electric height adjustment on my Vela Tango 100 Arthrodesis Indoor Furnishing isn't working?
- E
  Eric RyanAug 12, 2025
  If the electric height adjustment on your Vela Indoor Furnishing isn't working, here are a few things to check: * Ensure the plug is properly connected to the armrest. * Verify that the chair's battery has power and charge it with the supplied charger if necessary. * If there is too much or uneven load on the chair, try adjusting the height without sitting on it. If it still doesn't work, the gas cartridge may be defective and needs replacement. Contact your VELA supplier.
J
Jon HallAug 20, 2025
Why does my Vela Tango 100 Arthrodesis Indoor Furnishing chair roll badly?
- J
  joshua76Aug 20, 2025
  If your Vela Indoor Furnishing chair isn't rolling smoothly, the wheels may be blocked. Inspect the wheels and remove any wire residue or other obstructions. Also, if your chair has seat rotation, use it to straighten the chair.
A
Anthony MarquezAug 27, 2025
What to do if the manual height adjustment on my Vela Indoor Furnishing doesn't work?
- S
  Susan AlexanderAug 27, 2025
  If the manual height adjustment on your Vela Indoor Furnishing isn't working, it might be due to excessive or uneven weight on the chair. Try adjusting the height without sitting in the chair. If the problem persists, the gas cartridge could be faulty and require replacement. Contact your VELA supplier.
D
dkimSep 3, 2025
How to fix a loose armrest on my Vela Indoor Furnishing?
- S
  Sarah WebbSep 4, 2025
  If the armrest on your Vela Indoor Furnishing seems loose, check the hand screws. If any of them are loose, tighten them.