3.5 Program Steps
F1.0 RAW COUNTS DISPLAY
d Show normal counts on display.
E Display the internal raw counts.
F1.1 FILTER SETTING
One (1) is the lowest filtering and has the least damping effect and eight
(8) has the greatest effect.
Options: 1, 2, 3, 4, 5, 6, 7, 8.
F1.2 DISPLAY UPDATE RATE
Number of display updates per second.
Options: 20, 10, 5, 2, 1, 0.5, 0.25
F1.3 MOTION WIDTH in DIGITS
Select the width of the motion window by use of the TARE key. A selection
of d will disable the no motion requirement for use by the ZERO,
TARE, and PRINT functions.
Options: 0.5, 1, 2, 3, 4, 5, 6, d
F1.4 AUTO ZERO TRACKING ENABLE
d Auto zero tracking disabled.
E Auto zero tracking enabled.
F1.5 AUTO ZERO TRACKING WIDTH
Number of digits over which zero will automatically track.
Options: 0.5, 1, 2, 3
To Next Page
Loading...