F1.6 2% ZERO RANGE
d Zero active at any weight.
E Zero active to +/- 2% of capacity about zero.
F1.7 DISPLAY BRIGHTNESS
Select a value from zero (dimmest) to fifteen (brightest) for the display brightness
desired.
Options: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
F2.0 TARE ENABLE
d Tare disabled.
E Tare enabled.
F2.1 TARE INTERLOCK
d Tare may be changed at any weight indication.
E Weight must be at zero to clear tare.
F2.2 AUTO CLEAR TARE
d Not active.
E Tare will automatically clear when indication returns to less than 10 positive
digits of zero and no motion.
F3.0 BAUD RATE SELECTION
Select the desired BAUD rate for printing and serial input. The actual BAUD
rate is the displayed value times 100, e.g. a choice of 96 is really 96*100 or
9600 BAUD.
Options: 192, 96, 48, 24, 12, 6, 3
To Next Page
Loading...