Need help?Do you have a question about the Velleman C.Scope CS990 and is the answer not in the manual?
General| Operating Principle | VLF (Very Low Frequency) |
|---|---|
| Search Modes | All Metal, Discrimination |
| Discrimination | Yes |
| Sensitivity Adjustment | Yes |
| Volume Adjustment | Yes |
| Audio Feedback | Yes |
| Headphone Jack | Yes |
Overview of the metal detector's quality and recommended study for optimal use.
Outlines the main operational principles and capabilities of the CS-990 metal detector.
Explains ground effect and its impact on detector operation due to mineralisation.
Details G1 for mineralised inland sites and G2 for beaches/iron rejection.
Explains how to differentiate between valuable and worthless objects using signals.
Step-by-step instructions for assembling the metal detector from its dismantled state.
Instructions for fitting the PP3 batteries and important notes on battery life and storage.
Explains the ON/OFF Tune and SIMDISC controls for basic tuning and metal rejection.
Details the Ground Exclude, Level, and Auto-Tune controls for advanced settings and retuning.
Describes the meter's role in indicating tuning, discrimination, and target location, plus battery check.
Details battery compartments, stem assembly, and the search head's waterproof capabilities.
Steps for tuning and preparing the detector for searching.
Guidance on selecting modes (G1/G2, Simdisc) and interpreting signals in the field.
Information on detection area, range, and factors affecting depth of detection.
Techniques for determining object size, shape, and depth from audio and meter signals.
Guidelines for maintaining the detector's exterior and preventing damage from elements.
Precautions against salt damage and advice on using cleaning solvents safely.
Addresses common problems like detector not operating, signal fluctuations, and interference.
Explains causes of detector tune drift (temperature, battery) and how to resolve them.
To Next Page
