To Next PageTo Next PageWhy does my Velleman CS100N display or sound false signals?
Your Velleman Metal Detector may display or sound false signals if you are sweeping the search coil too fast or at the wrong angle. Try sweeping the search coil more slowly and ensure you are holding the detector correctly. Also, the detector might sound a false signal if it detects heavily oxidised metals; in this case, try pinpointing the target from several different angles.
General| Type | Very Low Frequency (VLF) |
|---|---|
| Control type | Buttons |
| Audible alarm(s) | Yes |
| Search depth (max) | - m |
| Search coil diameter | 165 mm |
| Suitable for materials | Metal |
| Built-in display | - |
| Battery type | AA |
| Battery technology | Alkaline |
| Number of batteries supported | 6 |
Weight and Dimensions| Height | 910 mm |
|---|---|
| Weight | 660 g |
Advises keeping the device away from children and unauthorized users, and handling potential hazards.
Covers device protection, intended use, warranty, rules, battery removal, and general care.
Guides on turning on the detector and fine-tuning its circuitry for consistent indications.
Instructions for testing the detector with metal objects and understanding basic operation.
Solutions for issues related to false signals, incorrect readings, or missed targets.
Addresses problems with the display not showing the correct metal type or tone.
