Need help?Do you have a question about the Velleman C.Scope CS660 and is the answer not in the manual?
General| Brand | Velleman |
|---|---|
| Model | C.Scope CS660 |
| Category | Metal Detector |
| Language | English |
Provides an overview of the CS-660 metal locator/detector and its purpose.
Details the components and functions of the CS-660, including TUNE, DISC, and RETUNE controls.
Step-by-step guide on how to assemble the CS-660 metal detector from its dismantled state.
Information on installing and using 9V batteries for the CS-660, including charging rechargeable types.
Instructions on tuning, re-tuning, and general operation of the CS-660 metal detector.
Explains the variable discrimination control for filtering unwanted signals like iron or foil.
Discusses how terrain affects signals and methods to control this influence on the detector.
Practical advice on detecting, testing signals, and understanding detection range.
Techniques for analyzing audio signals to estimate object size, shape, and depth before digging.
Guidelines for protecting the detector from damage, including salt damage and solvent use.
Troubleshooting common issues such as battery problems or lack of operation.
Explains causes of oscillating signals, often due to external equipment or nearby detectors.
Troubleshooting intermittent speaker sounds, possibly due to battery connections or loose speaker.
Addresses signal drift caused by temperature changes or battery drain, and how to stabilize it.
Steps to take before returning the detector for repair, including reading instructions and checking batteries.
To Next Page
